RCA01-006 RCA Female Connector Single Unit RCA Female Jack For Audio Signal Connection
Product Description
The name RCA comes from the Radio Corporation of America, which introduced the design in the 1930s. The RCA connector is an electrical connector widely used to transmit audio and video signals.The female and male sockets of a connector are called RCA jack and RCA plugs.It is also called RCA phono connector or phono connector.
Application
The RCA connector was originally used for audio signals. Like many other connectors, it has been used for purposes other than originally intended, including DC power connectors, RF connectors, and speaker cable connectors. Its use as a connector for composite video signals is common. RCA connectors and cables are also commonly used to transmit digital audio in S/PDIF format, with plugs colored to distinguish them from other typical connections.
Color Code Options:
The Female RCA Jack are often color-coded, yellow for composite video,red for the right audio channel, and white or black for the left channel of stereo audio.
| Digital audio | S/PDIF | Orange |
| Component analog video (YPBPR) | Y | Green |
| PB/CB | Blue |
| PR/CR | Red |
| Component analog video/VGA (RGB/HV) | R | Red |
| G | Green |
| B | Blue |
| H (Horizontal sync)/S(Composite Sync) | Yellow |
| V (Vertical sync) | White |
Product Specification:
| 1.Electrical characteristics |
| Power Rating | 30V/DC.1.0A. |
| Contact resistance | 30mΩ Max. |
| Insulation resistance | 100MQ Min. |
| Dielectric withtanding voltage | 500V AC RMS After 1 Minute |
| 2.Mechanical characteristics |
| Insertion force | 30N Max |
| Withdraw force | 8N Min. |
| Withdraw force for center contact | 5N Min(Use a OD=3.2±0.05mm,Length=14士0.20mm gauge plug) |
| Withstanding force for the terminal | 30N Max applied in pulled direction for 5 seconds |
| 3.Durability Performance |
| Life test | 1,500 Cycles Min. |
| 4.Environmental Performance |
| Temperatrue range | -40℃ to +70℃ |
| Salt spray | 24 Hours |
Our Services
1. Can customize to meet all your need
3. Offer 24 hours to reply your inquiries
4. Strong R&D team for technical support
5. Flexible lead time and can accept lower MOQ
FAQ
1.Q: Can you do OEM/ODM?
A: Yes, both OEM and ODM services are acceptable and we can also print your logo and make your packaging according to your requirements.
2.Q: Are you a factory or a trading company?
A: We are the manufacturer of foot switch......
3.Q: How do you ship the goods?
A: The products will be sent to you by optional shipping service, such express, air cargo, sea transportation.
4.Q: How is your product quality?
A: We always put emphasis on the quality of our product. Our product are 100% tested and inspected before shipment.
